ALL-TEST PRO 33 IND™ – Discontinued

Deenergized Testing Instrument

Instrument Discontinued as of August 31, 2019
The ALL-TEST PRO 34™   is a great alternative to the ALL-TEST PRO 33 IND™ and has had excellent success. 

The AT33 IND™ is the PERFECT TOOL for troubleshooting and performing an inspection on incoming or stored motors before installation or repair. This instrument shows the complete condition of the stator windings, rotor, contamination, ground fault, and connections.

This instrument presents an exciting breakthrough in deenergized testing. Within minutes, the operator can get a complete picture of the condition of the motor without having to stress-test the windings or use other more expensive and elaborate instruments, which can be difficult to operate and analyze captured data with.

With the AT33 IND™, there is no need to carry along hard-to-read manuals. A step-by-step operating procedure appears right on the screen, so performing tests and understanding the results is as easy as simply reading the display.

Perform two tests with one instrument with the AT33 IND™, which can be used in two modes: Static and Dynamic. Both tests quickly collect data in auto mode, so there is no need to push an abundance of difficult-to-understand buttons to get your motor testing results.

Patented Dynamic Stator and Rotor Signatures

Evaluate the condition of the stator and squirrel-cage rotor in a single test. This instrument is perfect for testing new and repaired motors prior to acceptance.

Patented Test Value Static™ (TVS™)

Whether testing directly at the motor or from the motor control center (MCC), Test Value Static™ can detect a change in the condition of the induction stator and squirrel-cage rotor motor.

Tests 3-phase AC induction squirrel-cage rotor motors < 1,000V.
The electrical health of all motor components is evaluated including stator windings, rotor, contaminations, ground faults, and connections.

  • There is no need to carry along hard-to-read manuals with the AT33 IND’s step-by-step operating procedure, displayed right on the screen. Performing tests and understanding the results is as easy as simply reading the display.
  • The AT33 IND allows you to perform two tests with one instrument using two modes: Static and Dynamic. Both tests quickly collect data in auto mode, so there is no need to push an abundance of difficult-to-understand buttons to get your motor testing results.
  • Tests take less than 3 minutes
  • Detects faults at the earliest stages before motor failure
  • Tests can be performed from over 1000′ away

Resources

Product Brochures and Specs

Product Case Studies

FAQs

No. Stray voltages in the instrument can make measurements unstable.
Test leads are specially made and are not available from a 3rd party source.
Failure of the battery to hold a charge could indicate needed battery replacement or a problem with the charger power supply. Contact ALL-TEST Pro Support for guidance.

Software

AT33 IND™ Software

Optional AT33 IND™ Software is available.

The instrument can quickly upload test data and compile reports, which can be further analyzed by a technician and compared to prior data of the same motor (or motor of the same model) to create a history of any problems and solutions. (Available in English, Spanish, Portuguese and Chinese)

Accessories

Included Accessories


Battery Charger
Battery Charger
Kelvin-Test-Leads
Kelvin Test Lead Set (including yellow ground lead)
Hard Case (holds the instrument, leads, & charger)
Hard Case
USB-Cable
USB Cable
Strap Wrench
Strap Wrench


Optional Accessories


Optional Kelvin Test Lead Set (including yellow ground lead)
Optional Kelvin Test Leads Set (including yellow ground lead)
Replacement Battery Pack
Replacement Battery Pack
3 Meter Custom Test Leads Set
3 Meter Custom Test Leads Set (including yellow ground lead)
Training Motor
Training Motor
Universal Soft Case Clear Face
Universal Soft Case Clear Face