The ALL-TEST PRO 34™ is a great alternative to the ALL-TEST PRO 33 IND™ and has had excellent success.
The AT33 IND™ is the PERFECT TOOL for troubleshooting and performing an inspection on incoming or stored motors before installation or repair. This instrument shows the complete condition of the stator windings, rotor, contamination, ground fault, and connections.
Complete Motor Health Assessment
The electrical health of all motor components is evaluated, including, but not limited to induction windings, rotors and all associated connections and cables.
Patented Test Value Static™ (TVS™)
Test Value Static (TVS) is a sum calculated from the 3-phase MCA static test and is used as a reference value for the motor. Common types of faults in the rotor and stator windings will change TVS.
Patented Dynamic Stator and Rotor Signatures™
Used to evaluate the condition of the stator and squirrel-cage rotor in a single test. Perfect for testing new and repaired motors prior to acceptance.
This instrument presents an exciting breakthrough in deenergized testing. Within minutes, the operator can get a complete picture of the condition of the motor without having to stress-test the windings or use other more expensive and elaborate instruments, which can be difficult to operate and analyze captured data with.
With the AT33 IND™, there is no need to carry along hard-to-read manuals. A step-by-step operating procedure appears right on the screen, so performing tests and understanding the results is as easy as simply reading the display.
Perform two tests with one instrument with the AT33 IND™, which can be used in two modes: Static and Dynamic. Both tests quickly collect data in auto mode, so there is no need to push an abundance of difficult-to-understand buttons to get your motor testing results.
There is no need to carry along hard-to-read manuals with the AT33 IND’s step-by-step operating procedure, displayed right on the screen. Performing tests and understanding the results is as easy as simply reading the display.
The AT33 IND allows you to perform two tests with one instrument using two modes: Static and Dynamic. Both tests quickly collect data in auto mode, so there is no need to push an abundance of difficult-to-understand buttons to get your motor testing results.
Tests take less than 3 minutes
Detects faults at the earliest stages before motor failure
Tests can be performed from over 1000′ away
Tests AC induction, squirrel-cage rotor motors <1000V. The electrical health of all motor components is evaluated, including induction windings and rotor, associated connections and cables.